-
Heat Shrink Insulation Tube
-
Dual Wall Heat Shrink Tube
-
Single Wall Heat Shrink Tubing
-
Busbar Tube
-
PTFE Products
-
Silicone Fiberglass Sleeve
-
Heat Shrink Connector
-
Fishing Rod Shrink Tube
-
Plastic PVC Tube
-
Silicone Rubber Tube
-
PET Cable Sleeve
-
Cold Shrink Tube
-
Heat Shrink Cable Accessories
-
Nylon Cable Ties
-
ENRIQUE ARDUANVery fast,and very good, i order a article and in less than 20days have in me business(Spain). In 20 days build and ship. They do exactly that I request. I recommend all of all.
-
Dick Hammer, SwedenQuick and informative responses. Nice quality on the samples we received, we were very satisfied.
-
Jon Reynolds, United StatesProduct quality exceeded my expectations. Customer service is top notch! Answered all my queations & continued to communicate with me through the shipping process.
-
Javier saltos, EcuadorProducto en perfectas condicones. Muy buena presentacion recibido en excelente condiciones. Perfecto.
-
Jun pyo lee, South KoreaGood quality fast delivery very good
Black 3 To 1 Medium Wall Heat Shrink Tubing Adhesive Lined Double Wall
Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xSize | 25mm | Shrink Ratio | 3:1 |
---|---|---|---|
Color | Black | MOQ | 1 Meter |
Retardant | Flame Retardant | Seals And Protects | Cable Splices And Terminations |
Continuous OperatingTemperature | 10°C | Shrink Temperature | 125%^ |
Highlight | Black Medium Wall Heat Shrink Tubing,3 to 1 Medium Wall Heat Shrink Tubing,Adhesive Lined double wall heat shrink |
Black Medium Wall Adhesive Lined Heat Shrinkable Tubing For A Variety Of Low Voltage
• Medium wall heat shrinkable tubing suitable for a variety of low voltage electrical and mechanical application,where lighter weight and greater
flexibility are important
• Flame retardant
• Seals and protects cable splices and terminations
• High resistance to impact and abrasion
• Optional thermoplastic adhesive liner for complete environmental protection and insulation
• Continuous OperatingTemperature:-45c€ to1 25°C
• Shrink Temperature:! 25%^
Selection Table
s” | As Supplied | After Recovery/mm | Standard Length (m/pc) | |||
mm | Internal Diameter | Internal Diameter | Out Layer Wall Thickness | Adhesive Layer Wall Thickness | Total Wall Thickness | |
10.2/3.0 | >10.2 | W 3.0 | 1 .4+0.20 | 0.35±0.10 | 1.75+0.25 | 1.22 |
16.0/5.0 | 洞6.0 | W 5.0 | 1 .5±0.20 | 0.40±0.10 | 1.90±0.25 | 1.22 |
19.1/5.6 | R9.1 | W 5.6 | 2.0+0.20 | 0.45+0.10 | 2.45±0.25 | 1.22 |
25.0/8.0 | N25.0 | W 8.0 | 2.0±0.20 | 0.45±0.10 | 2.45±0.25 | 1.22 |
28.0/6.0 | N28.0 | W 6.0 | 2.5±0.20 | 0.65±0.10 | 3.10±0.30 | 1.22 |
28.0/9.0 | N28.0 | W 9.0 | 2.0±0.20 | 0.50±0.10 | 2.60±0.25 | 1.22 |
35.0/10.2 | N35.0 | W 10.2 | 2.2±0.20 | 0.50±0.10 | 2.70±0.25 | 1.22 |
38.1/12.0 | N38.1 | w 1 2.0 | 2.2±0.20 | 0.50±0.10 | 2.70±0.25 | 1.22 |
43.2/12.7 | N43.2 | W 12.7 | 2.2±0.20 | 0.50±0.10 | 2.70±0.25 | 1.22 |
52.1/16.0 | N52.1 | W 1 6.0 | 2.3+0.25 | 0.50±0.15 | 2.80±0.30 | 1.22 |
63.0/19.0 | M63.0 | W 1 9.0 | 2.5±0.25 | 0.50±0.15 | 3.00±0.30 | 1.22 |
75.0/22 | N75.0 | W 22.0 | 2.6±0.25 | 0.50±0.15 | 3.00±0.30 | 1.22 |
85.0/25.0 | N85.0 | W 25.0 | 2.8±0.30 | 0.50±0.15 | 3.30±0.30 | 1.22 |
95.0/29.0 | N95.0 | W 29.0 | 3.1+0.30 | 0.60±0.20 | 3.70+0.35 | 1.22 |
115.0/43.0 | N115.0 | W 34.0 | 3.1±0.30 | 0.60±0.20 | 3.70±0.35 | 1.22 |
140.0/42.0 | ^140.0 | W 42.0 | 3.1±0.30 | 0.60±0.20 | 3.70±0.35 | 1.22 |
Technical Data
Hot Melt Adhesive Property
I Property | I Test Method | I Stantard I |
Tensile Strength(Mpa) | ASTM D2671 | R0.4 |
Elongation(%) | ASTM D2671 | 2300 |
Density(g/cm3) | ASTM D792 | 1.2 |
Longitudinal changel%) | UL224 | w±10 |
Elongation after aging(%) | UL224158昭 X168hrs | 3200 |
Heat shock | UL224 225TX4hrs | No cracking |
Dielectric strength(kv/mm) | IEC 243 | m2. |
Volume resistivity!Q , cm) | IEC 93 | >1014 |
Water absorptioni%) | ASTM-D570 | <0.5 |
I Property I | Test Method | I Stantard I |
WaterAbsorption | ASTM D570 | W0.2% |
Sofening Point | ASTM E28 | 95 丁 |
Peel Strength(PE) | ASTM D 1000 | 120N/25mm |
Peel Strength(AL) | ASTM D 1000 | 80N/25mm |
FAQ
Professional Production Quality is Reliable
Q1 . Which certifications or test reports do you have?
A : We have UL,ROHS and REACH.
Q2 . How to ship my order? Is it safe?
A : For small package, we will send it by Express,such as Fedex, UPS,TNT, DHL and so on.
For big packages, we will send them by Air or By sea or by Train. We will use good packing and ensure the safety. We will be responsible to any product damage caused on delivery.”
Q3 . What about your delivery time?
A : We have a lot of products in stock. We can send the stock products in 3 work days.
If without stock,or stock is not enough, we will check the delivery time with you.” (Usually is 3-7days).
Q4 . Can you provide samples? Are the samples free?
A : Yes. We can provide samples.
Usually for our standard products with stock, we can supply samples free for testing.
Q5 . Could I put my own logo on it?
A : Sure, of course, we are a professional manufacture and have over 10 years OEM experience.